ABS & PA-like

all the needed basics for daily jobs.

PR408, PR1508, PR2000 & PR500
USER-FRIENDLY ALL-ROUND RESINS
  • These resins are convenient for simple jobs and small series
  • Available in various rigidities to answer any project requirement
  • Faster demoulding and increased mechanical properties with the addition of SYNFILL G fibreglass filler

In Accordance With

REACH

EC Regulation 1907/ 2006, SVHC list in force

RoHS 

Directive EU 2011/ 65, 2015/ 863 & 2017/ 2102

End-of-life vehicle directive

2000/ 53/ EC

WEEE Directive

2002/ 96/ EC

Directive related to cosmetic products

2000/ 11/ EC

Recycling compliance

IMDS (mdsystem.com)

the Basic PR408

  • Simple 1:2 mixing ratio for an easy application
  • White and colourable material
  • Best quality and price ratio for fast demoulding materials
  • The PR408 for optimised demoulding and the PR1508 for bigger parts
  • Possibility to increase the mechanical properties with the glass fibre filler SYNFILL G

Documents

TDS PR408

Technical data sheet of the PR408. All mechanical and thermal properties of the white basic vacuum casting resin PR408.

+ download (pdf | 0,3 MB)

TDS PR408 + SYNFILL G

Technical data sheet of the PR408 with SYNFILL G. All mechanical and thermal properties of the colourable vacuum casting resin PR408, at different filler rates of added Synfill G.

+ download (pdf | 0,3 MB)

the Basic PR1508

  • Simple 1:2 mixing ratio for an easy application
  • White and colourable material
  • Best quality and price ratio for fast demoulding materials
  • The PR408 for optimised demoulding and the PR1508 for bigger parts
  • Possibility to increase the mechanical properties with the glass fibre filler SYNFILL G

Documents

TDS PR1508

Technical data sheet of the PR1508. All mechanical and thermal properties of the long pot life basic vacuum casting resin PR1508.

+ download (pdf | 0,3 MB)

the Optimised PR2000

  • A 1:2 mixing ratio to maximise user-friendliness
  • White and colourable material
  • HdT above > 100 °C to suit most of technical projects

Documents

TDS PR2000

Technical data sheet of the PR2000. All mechanical and thermal properties of the classic, ABS-like prototyping resin PR2000.

+ download (pdf | 0,3 MB)

The Fast Demoulding PR500

  • Very strong mechanical properties immediately after demoulding, no post-curing required
  • Clear and colourable material
  • High rigidity of 2600 MPa and up to 5600 MPa with the addition of the glass fibre filler SYNFILL G
  • Possibility to increase the dimensional stability with the fibre glass filler SYNFILL G

Documents

TDS PR500

Technical data sheet of the PR500. All mechanical and thermal properties of the colourable and rigid prototyping resin PR500.

+ download (pdf | 0,3 MB)

TDS PR500 + SYNFILL G

Technical data sheet of the PR500 with SYNFILL G. All mechanical and thermal properties of the colourable and rigid resin PR500, at different filler rates of added Synfill G.

+ download (pdf | 0,4 MB)
available Test reports
  • dielectric properties
  • thermal conductivity
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

Do you have a question?

Just ask us!

+33 3 44 31 72 00 comm@synthene.com

Technical Data

PRODUCT NAMEPR408PR1508PR2000PR500PRODUCT NAME
Hardness77D77D80D85DHardness(Shore)
Simulation of ²ABSABSABSABS, PA & PCSimulation of ²
Colour of the cured materialmilky/ whitemilky/ whitemilky/ whiteclear transp.Colour of the cured material
Colourability ⁴
Colourability ⁴
PROPERTIESPROPERTIES
Density1,121,121,131,16Density(g/ cm3)
Flexural modulus1600170020002600Flexural modulus(MPa)ISO 178
Maximum flexural strength606080102Maximum flexural strength(MPa)ISO 178
Elongation at break1013510Elongation at break(%)ISO 527
Tensile modulus of elasticity1700180018502600Tensile modulus of elasticity(MPa)ISO 527-1
Tensile strength39395778Tensile strength(MPa)ISO 527-1
Impact resistance28323069Impact resistance(kJ · m-2)ISO 179
Heat deflection Temperature ⁵707110193Heat deflection Temperature ⁵(°C)ISO 75
Mixing ratio (P : Iso)50 : 10050 : 10050 : 10040 : 100Mixing ratio (P : Iso)(in weight)
Mix viscosity at 25°C250250350600Mix viscosity at 25°C(mPa · s)
Pot life by 25°C51265Pot life by 25°C(min)
Demoulding time by 70°C601206045Demoulding time by 70°C(min)
Linear shrinkage thickness by 23°C4443Linear shrinkage thickness by 23°C(mm/ m)
App. maximum wall thickness~ 5App. maximum wall thickness(mm)
Mould life in silicone ⁶15 − 2015 − 2015 − 2020Mould life in silicone ⁶(number of parts)
STORAGESTORAGE
Standard & alternative packaging151512 1511,2Standard & alternative packaging(kg)
Shelf life ⁷1212126Shelf life ⁷(months)
AnnotationsABS-like all-round colourable material
Limited exothermy
Fast demoulding
ABS-like all-round colourable material
Limited exothermy
Longer potlife for larger parts
ABS-like allround material
Colourable
Good mechanical properties
Very good mechanical properties at demoulding
Colourable

Annotations

Do you have a question?

Just ask us!

+33 3 44 31 72 00 comm@synthene.com

Footnotes

  1. The exact data are available in our TDS. The thermal and mechanical properties have been tested under specific conditions of curing and post-curing
  2. Simulation of plastic once the resin is cured
  3. Under UV action, the colour tends to darken
  4. All the colours indicated in this document are illustrative and not contractual
  5. After heat treatment
  6. Silicone mould life: according to our experience, depending on the mould geometry, surface, demoulding time, kind of silicone, etc.
  7. On unopened jerrycans or bottles