PC & PMMA-like

UV-stable and everlasting transparency.

PRc1810, prc1819, cristal HRI 35
Crystal-CLEAR & UV-STABLE
  • Adapted solutions from thin PRC1810 to mass CRISTAL HRI 35 casting
  • A stunning combination of thermal, mechanical and optical properties for projects like automotive headlamps or perfume bottles
  • Extreme UV-resistance even in outdoor conditions
  • Possibility to adapt the level of diffusion with the light diffusing additive PP0420 for lighting design
Transparency Tradition

Since the 1970s SYNTHENE has built a lot of expertise and know-how formulating transparent resins with high UV‑stability.

In Accordance With

REACH

EC Regulation 1907/ 2006

RoHS

Directive EU 2011/ 65, 2015/ 863 & 2017/ 2102

End-of-life vehicle directive

2000/ 53/ EC

WEEE Directive

2002/ 96/ EC

Directive related to cosmetic products

2000/ 11/ EC

Recycling compliance

IMDS (mdsystem.com)

Documents

TDS diffusing additive PP0420

Technical data sheet of the PP0420. All physical properties and application process of the light diffusing additive.

+ download (pdf | 0,2 MB)

the Best-seller PRc1810

  • Long shelf life
  • Exceptional UV-resistance to put the light on demanding indoor & outdoor projects
  • High HdT of 84 °C and superior impact resistance with 84 kJ·m-2
  • Optimised demoulding time and mechanical properties ratio

Documents

TDS PRc1810

Technical data sheet of the PRC1810. All mechanical, thermal, and optical properties of the clear transparent prototyping resin PRC1810.

+ download (pdf | 0,3 MB)
available Test reports
  • chemical resistance
  • dielectric properties
  • flame resistance
  • optical properties
  • thermal conductivity
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

THE RESISTANT PRc1819

  • Long shelf life
  • Exceptionally UV-stable for both prototypes and functional parts
  • Variation of PRC1810 with a longer pot life allowing the casting of medium-sized to big parts
  • A bright spark with ultimate level of impact resistance (90 kJ·m-2)

Documents

TDS PRC1819

Technical data sheet of the PRC1819. All mechanical, thermal, and optical properties of the clear transparent prototyping resin PRC1819.

+ download (pdf | 0,3 MB)
available Test reports
  • chemical resistance
  • flame resistance
  • optical properties
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

the Mass-Casting CRISTAL HRI 35

  • Long shelf life
  • Utmost transparency and refractive index of 1,54 leading to a crystal-like brilliance
  • Adapted to mass casting with wall thicknesses up to 100 mm
  • Versatile resin that can be casted by hand or with a vacuum casting machine and suited to many different type of projects

Documents

TDS CRISTAL HRI 35

Technical data sheet of the CRISTAL HRI35. All mechanical, thermal, and optical properties of the clear transparent, mass casting resin CRISTAL HRI35.

+ download (pdf | 0,3 MB)
available Test reports
  • flame resistance
  • optical properties
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

Do you have a question?

Just ask us!

+33 3 44 31 72 00 comm@synthene.com

Technical Data

PRODUCT NAMEPRC1810PRC1819CRISTAL HRI 35PRODUCT NAME
Hardness85D85D84DHardness(Shore)
Simulation of ⁴ABS/PC/PMMA ABS/PC/PMMA ABS/PC/PMMA Simulation of ⁴
Colour of the cured materialclear transparent clear transparent clear transparentColour of the cured material
Colourability ⁴Colourability ⁴
PROPERTIESPROPERTIES
Density1,11,11,21Density(g/ cm3)
Flexural modulus220021002000Flexural modulus(MPa)ISO 178
Maximum flexural strength888075Maximum flexural strength(MPa)ISO 178
Elongation at break6,5145Elongation at break(%)ISO 527
Tensile modulus of elasticity235021002200Tensile modulus of elasticity(MPa)ISO 527-1
Tensile strength656060Tensile strength(MPa)ISO 527-1
Impact resistance849050Impact resistance(kJ · m-2)ISO 179
Heat deflection Temperature ⁵848662Heat deflection Temperature ⁵(°C)ISO 75
Mixing ratio (P : Iso)56 : 10056 : 10065 : 100Mixing ratio (P : Iso)(in weight)
Mix viscosity at 25°C450450650Mix viscosity at 25°C(mPa · s)
Pot life by 25°C91935Pot life by 25°C(min)
Demoulding time by 70°C120120180Demoulding time by 70°C(min)
Linear shrinkage thickness by 23°C63Linear shrinkage thickness by 23°C(mm/ m)
App. maximum wall thickness~ 10~ 50100App. maximum wall thickness(mm)
Mould life in silicone ⁶2020Mould life in silicone ⁶(number of parts)
STORAGESTORAGE
Standard & alternative packaging10,02 16,810,02 16,89,9 16,5Standard & alternative packaging(kg)
Shelf life ⁷121212Shelf life ⁷(months)
AnnotationsLimited aggressiveness against silicone
Transparent like glass
Flame retardant according to EN 60695-11- 10A (HB)
Limited aggressiveness against silicone
Transparent like glass
Flame retardant according to EN 60695-11- 10A (HB)
Suitable for mass casting
Transparent like glass
Very high refractive index (1,54)
Annotations

Do you have a question?

Just ask us!

+33 3 44 31 72 00 comm@synthene.com

Footnotes

  1. The exact data are available in our TDS. The thermal and mechanical properties have been tested under specific conditions of curing and post-curing
  2. Simulation of plastic once the resin is cured
  3. Under UV action, the colour tends to darken
  4. All the colours indicated in this document are illustrative and not contractual
  5. After heat treatment
  6. Silicone mould life: according to our experience, depending on the mould geometry, surface, demoulding time, kind of silicone, etc.
  7. On unopened jerry-cans or bottles
    flame resistance,  chemical resistance,  dielectric properties,  thermal conductivity,  food compatibility,  optical properties