ABS, HDPE & PP-like − PR7 SERIES

for advanced prototyping & small series.

PR700, PR777, PR740 & PR752
SYNTHENE’S Line OF PRODUCTS Gathering performance & simplicity
  • Based on the technological assets of PR700
  • Available in versatile rigidities & colourabilities
  • For the simulation of thermoplastics like HDPE, PP & ABS

space

A SINGLE ISO COMPONENT FOR FOUR RESINS
  • The common technology of the PR7 SERIES is based on the PR700 isocyanate that is
  • also used for PR752, PR777 and PR740
  • For that reason, all those resins share PR700’s low-aggressiveness to silicone moulds
  • They also offer an easier storage as they benefit from a long shelf life of 18 months and a common single component

In Accordance With

REACH

EC Regulation 1907/ 2006, SVHC list in force

RoHS

Directive EU 2011/ 65, 2015/ 863 & 2017/ 2102

End-of-life vehicle directive

2000/ 53/ EC

WEEE Directive

2002/ 96/ EC

Directive related to cosmetic products

2000/ 11/ EC

Recycling compliance

IMDS (mdsystem.com)

Flyer PR7 SERIES

Flyer presenting the whole PR7 SERIES range. Highlight and Comparison of the advanced properties of the PR7 SERIES.

+ download (pdf | 1,2 MB)

the best-seller PR700

  • Long shelf life
  • This resin is SYNTHENE’s classic and worldwide best-seller
  • This naturally black counter type of ABS is ideal for many automotive jobs
  • Silicone’s best friend: its exceptional non-aggressiveness enables a great number of castings in the same mould

Documents

Flyer PR700

Flyer presenting the benefits and technical information about the PR700.

+ download (pdf | 0,3 MB)

TDS PR700

Technical data sheet of the PR700. All mechanical and thermal properties of the upscale prototyping resin PR700.

+ download (pdf | 0,3 MB)

TDS PR700 + SYNFILL G

Technical data sheet of the PR700 in combination with SYNFILL G. All mechanical and thermal properties of the upscale prototyping resin PR700, at different filler rates of added Synfill G.

+ download (pdf | 0,5 MB)

TDS PR700 LS

Technical data sheet of the limited oder version of PR700 LS. All mechanical and thermal properties of the upscale prototyping resin with odour-masking agent, PR700 LS.

+ download (pdf | 0,1 MB)
available Test reports
  • chemical resistance
  • dielectric properties
  • flame resistance
  • thermal conductivity
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

the flexible PR740

  • Suitable for living hinges and very resistant to torsional and bending forces
  • Limited isocyanate aggressiveness to ensure long mould life
  • High chemical resistance to various aqueous solutions and engine fluids
  • Overall good mechanical resistance with very high elongation at break > 50% and high impact resistance even notched

Documents

TDS PR740

Technical data sheet of the PR740. All mechanical and thermal properties of the flexible prototyping resin PR740.

+ download (pdf | 0,3 MB)
available Test reports
  • chemical resistance
  • dielectric properties
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

the heat-resistant PR752

  • Long shelf life
  • The best of the range regarding thermal resistance with a 150 °C HdT
  • This property, associated with a good colourability makes it a unique material
  • Caring about the user’s comfort, the PR752 has been developed with an odour-masking agent
  • It is a good counter type of ABS-HT & PEEK

Documents

TDS PR752

Technical data sheet of the PR752. All mechanical and thermal properties of the resistant prototyping resin PR752.

+ download (pdf | 0,3 MB)

TDS PR752 + SYNFILL G

Technical data sheet of the PR752 with SYNFILL G. All mechanical and thermal properties of the resistant prototyping resin PR752, at different filler rates of added Synfill G.

+ download (pdf | 0,4 MB)
available Test reports
  • chemical resistance
  • flame resistance
  • thermal conductivity
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

the semi-flexible PR777

  • Long shelf life
  • This material completes the range with an intermediary rigidity (modulus: 1000 MPa), making it a nice counter type of HDPE and PP
  • Strong material suitable for mechanically stressed parts like clips
  • Its 1:1 mixing ratio, long pot-life and short demoulding time establish a winning combination

Documents

TDS PR777

Technical data sheet of the PR777. All mechanical and thermal properties of the PP-like prototyping resin PR777.

+ download (pdf | 0,3 MB)

TDS PR777 + SYNFILL G

Technical data sheet of the PR777 with SYNFILL G. All mechanical and thermal properties of the PP-like prototyping resin PR777, at different filler rates of added Synfill G.

+ download (pdf | 0,4 MB)
available Test reports
  • chemical resistance
  • dielectric properties
  • flame resistance
  • thermal conductivity
Please contact us in order to get a copy of the test reports. We will happily provide them to you.

Do you have a question?

Just ask us!

+33 3 44 31 72 00 comm@synthene.com

Technical Data

PRODUCT NAMEPR700PR740PR752PR777PRODUCT NAME
Hardness82D70D87D75DHardness(Shore)
Simulation of ²ABSHDPE/ PPABSHDPE/ PPSimulation of ²
Colour of the cured materialblackgold−transp. ³gold−transp. ³milky/ beige ³Colour of the cured material
Colourability ⁴
Colourability ⁴
PROPERTIESPROPERTIES
Density1,141,111,161,13Density(g/ cm3)
Flexural modulus17005902200930Flexural modulus(MPa)ISO 178
Maximum flexural strength70259636Maximum flexural strength(MPa)ISO 178
Elongation at break13> 50535Elongation at break(%)ISO 527
Tensile modulus of elasticity180065020001000Tensile modulus of elasticity(MPa)ISO 527-1
Tensile strength60> 207536Tensile strength(MPa)ISO 527-1
Impact resistance6024 (notched)11,491Impact resistance(kJ · m-2)ISO 179
Heat deflection Temperature ⁵13096150110Heat deflection Temperature ⁵(°C)ISO 75
Mixing ratio (P : Iso)80 : 100120 : 10060 : 100100 : 100Mixing ratio (P : Iso)(in weight)
Mix viscosity at 25°C60010001000700Mix viscosity at 25°C(mPa · s)
Pot life by 25°C77 ½6 − 810Pot life by 25°C(min)
Demoulding time by 70°C45 − 60405045Demoulding time by 70°C(min)
Linear shrinkage thickness by 23°C7777Linear shrinkage thickness by 23°C(mm/ m)
App. maximum wall thicknessApp. maximum wall thickness(mm)
Mould life in silicone ⁶30 − 6030 − 5030 − 5030 − 50Mould life in silicone ⁶(number of parts)
STORAGESTORAGE
Standard & alternative packaging10,8 1813,21612 20Standard & alternative packaging(kg)
Shelf life ⁷18181818Shelf life ⁷(months)
AnnotationsVery good all round properties
Extremely long mould life
Flame retardant according to EN 60695-11-10A (HB)
Flexible product
Colourable
Suitable for living hinges
Long mould life
Very high thermal and mechanical properties
Long mould life
Very strong material
Colourable
Intermediary rigidity
Long mould life
Flame retardant according to EN 60695-11-10A (HB)
Annotations

Do you have a question?

Just ask us!

+33 3 44 31 72 00 comm@synthene.com

Footnotes

  1. The exact data are available in our TDS. The thermal and mechanical properties have been tested under specific conditions of curing and post-curing
  2. Simulation of plastic once the resin is cured
  3. Under UV action, the colour tends to darken
  4. All the colours indicated in this document are illustrative and not contractual
  5. After heat treatment
  6. Silicone mould life: according to our experience, depending on the mould geometry, surface, demoulding time, kind of silicone, etc.
  7. On unopened jerry-cans or bottles
  8. flame resistance,  chemical resistance,  dielectric properties,  thermal conductivity,  food compatibility,  optical properties